What's New: Equipment News

Now available, TaylorMade BRNR Mini-Drivers bring modern interpretation on a classic (maybe legendary) design. The BRNR Mini-Driver pays homage to the late 90’s TaylorMade Burner™ drivers in styling. However, it incorporates today’s Movable Weight Technology to give players control over forgiveness, versatility, trajectory or increased distance with a piercing ball flight. The new BRNR Mini-Drivers are available in 11.5 and 13.5 degree lofts, adjustable +/- 2 degrees with the Loft Sleeve. See full specs at TaylorMadeGolf.com. FORGIVENESS & ADJUSTABILITY The new BRNR mini drivers combine carbon fiber, titanium and steel to create incredible sound, feel and performance. Split weights at the front and rear of the head allow golfers to switch between the standard setting for balanced performance and the low spin setting for piercing trajectory. PRECISE TURF INTERACTION The TaylorMade K-SOLE design reduces turf resistance, promoting a consistent strike. This design also allows golfers to utilize “driver off the deck” distance while benefitting from a higher-lofted fairway wood. TOUR PROVEN TECHNOLOGIES TaylorMade’s Twist Face®, Thru-Slot Speed Pocket™ and the adjustable Loft Sleeve maximize the playability of the TaylorMade BRNR Mini-Drivers. The Twist Face design increases forgiveness with mishits. The Speed Pocket maximizes ball speeds and adds forgiveness with low-face... Read More

The limited edition P-790 Phantom Black Irons from TaylorMade are bold and elegant, sleek and high performing. Irons that symbolize a relentless pursuit of perfection, these new irons utilize a black PVD finish to deliver that sleek look. Forged with 4140 steel, like other P790 irons, they deliver a soft feel within a lighter face to increase club speed. The newly engineered SpeedFoam™ Air is 69% lighter than its predecessor. These weight savings were redistributed to optimize launch conditions. Plus, TaylorMade features an intelligent sweet spot to help capture more shots, pinpointing performance where golfers need it the most. With its thin-wall construction, forged L-Face and redesigned tungsten weighting, the new P-790 irons produce optimal launch with more forgiveness shot after shot. Club Stock Specifications The new P-790 Phantom Black Irons are available in both right-handed and left-handed setups. TaylorMade offers a handful of off-the-shelf shafts, but if you deserve the perfectly fit shaft to pair with these sleek, elegant and high-performing players distance irons. CLUB LOFT LIE OFFSET 4-iron 21° 61° 3.4mm 5-iron 23.5° 61.5° 3.1mm 6-iron 26.5° 62° 2.9mm 7-iron 30.5° 62.5° 2.7mm 8-iron 35° 63° 2.4mm 9-iron 40° 63.5° 2.1mm PW 45° 64° 1.8mm Visit TaylorMade.com for more... Read More

New for 2023, the Muira CB-302 and MC-502 irons live up to Muira’s legacy of the world’s finest forged golf clubs. Each club is individually made using Miura’s patented forging process. The CB-302 irons are the longest forged cavity-back iron from Muira, and the MC-502 improves forgiveness and performance over the previously very popular MC-501 irons. Miura Golf CB-302 Irons The CB-302 irons feature the largest sole width (19mm / 7 iron) ever produced by Miura Golf. The larger design, amidst other subtle enhancements, makes the CB-302 optimal for forgiveness. In addition, a precise amount of camber, leading and trailing edge relief, and Miura’s iconic Y grind enhance performance regardless of a golfer’s swing trajectory. Premium craftsmanship – highlighted by the shape of the cavity, the CB-302 optimizes weight distribution unique to each irons’ loft. Optimized forgiveness – the wider sole, coupled with a precise amount of camber and leading and trailing edge relief optimizes forgiveness. Variable depth cavities – The CB-302 design focuses impact power at the apex of the V-cut, allowing for effective distribution of weight between the heel and toe. Available in 4-iron through GW. Constructed of Premium (S20C) Soft Carbon Steel with a Satin Chrome finish.... Read More

The new Accra TZ RPG woods shafts uniquely offer the added option of a high and low balance point. Premium materials, consistent construction and the unique balance point are a club fitters dream – delivering a premium shaft for premium players. The Tour Z RPG shaft enhances energy transfer more than any previous Accra shaft. The Tour Z RPG Tour delivers maximum performance for high club head speeds with premium stability, power and feel. The TZ RPG Tour (for higher swing speeds) Dubbed RPG Gold, the TZ RPG Tour shaft emphasizes premium quality, tight tolerances and exceptional performance. The TZ RPG Tour features 10 of the most advanced composite materials and uses less resin content of any prior shaft from ACCRA. The incorporation of only Aerospace grade prepreg from Toray Japan ensures perfect symmetry, strength and power. Thus making the Tour Z RPG the smoothest feeling, stable shaft in the industry. See additional specs for the TZ RPG Tour shafts. The TZ RPG The TZ RPG shaft utilizes a new five directional ultra-light weight weave that runs the entire length of the shaft. This adds stability and increases the rate of recovery. This weave, high modulus composite materials and the... Read More

Callaway created a masterpiece when they introduced the Jaws Raw wedges and full-face design. The new Jaws Raw wedges feature the most aggressive grooves in golf, with a raw face that promotes maximum spin. They are an absolute spin machine with full face Jaws grooves and versatility that makes all chip and bunker shots easier to hit. Callaway also incorporates tungsten technology for a weight-balanced club that offers both feel and control. For many players, the full-toe shaping inspires confidence at address and helps to deliver control on all types of wedge shots. Plus, Sam Burns just won with the new Jaws Raw wedges – read his 2023 WITB. Callaway Jaws Raw Wedges are an Absolute Spin Machine Grooves across the face, with a 37° wall angle to elevate the groove-edge sharpness. From 80 yards and in, these grooves promote a controlled “one hop and stop” trajectory. New raw face enables a more direct connection between the ball and the face at impact. With no plating, it’s normal for the face to rust. Offset Groove-in-Groove Technology, which positions the milled micro-grooves at a 20° angle to promote added spin on chips, pitches, and lob shots. Jaws Raw Full Toe Specs The Jaws Raw... Read More

The 2023 Golf Digest Hot List was just released! For many, this and the Golf Expo mark the first official start of the golf season. The Hot List team convenes in the fall a literally spends a couple weeks testing equipment from several manufacturers. In total, over 138 clubs tested this year made the Hot List. See how clubs from Callaway, Cobra, Mizuno, Ping, PXG, Srixon, TaylorMade, Titleist, and Tour Edge ranked.   How to Select New Clubs Aesthetics – Look, Sound and Feel After 25 years of custom club fitting, we so tightly match optimal shaft to a player’s swing that they can focus on look, sound and feel. Select a club that looks good to your eye, sounds good when you hit it, and has the feel and feedback you desire. However, sometimes golfers cannot make solid contact with a club if the aesthetics are not right, even if it supposedly matches them perfectly from a fitting perspective. It could be as simple as top line on an iron, color of a driver, finish (glossy paint or matte finish).  All of these can make a difference.   Performance – Distance, Accuracy and Consistency The majority of the golfers... Read More

The Exotics 723 Series Irons leverage enhancements in materials and VIBRCOR technology to deliver distance and forgiveness. Building on the Diamond Face VFT, both the E723 and C723 irons generate increased ball speed across the face. The new Pro 723 Forged features precision milling for maximizing power and providing forgiveness for off-center hits. Material and body designs are producing even higher launch angles with face-flexing for enhanced consistency.  See the sleeker, thinner designs and specs at Tour Edge. E723 Irons – Game Improvement The E723 Irons are the most forgiving distance irons ever from Tour Edge. Fitting in the game-improvement category, the E723 Irons’ advancements with VIBRCOR technology. This provides the support, sound and feel of a forged iron while enhancing feel. In addition to feel, VIBRCOR TPU produces faster ball speed, dampens sound and shock, and creates maximum forgiveness. Increasing consistency for off-center hits, there are 103 total diamond shapes across the Diamond Face VFT featuring three different thicknesses in an interweaving pattern. In addition, the 360° Undercut Design is a one-piece high-strength steel body that lowers CG. The lower CG produces a higher launch and increases face flexing further enhancing ball speed and overall distance. C723 Irons –... Read More

The Tour Edge Exotics 723 Series Woods bring practical adjustability to life. The innovations in the Flight Tuning System allow for optimal tuning of launch and spin with adjustable weights. The rear slider weight can accommodate up to a +/- 10-yard draw or fade bias. Further weight reductions from carbon and concentration of weights lower CG and increase MOI. Thus making the Exotics 723 Series Woods that much better than the 722 Series. See all specs at Tour Edge. E723 and C723 Drivers Increased adjustability is the biggest advancement in the E723 and C723 Drivers. The Flight Tuning System design adds a rear weight at the extreme trailing edge on the sole of the clubhead. In the E723, the 20-gram weight allows for a +/- 10-yard heel and toe bias in directional flight. In the C723, the 15-gram weight allows for a +/1 7-yard draw or fade bais. The extreme low rearward CG position produces an extremely high MOI and increase stability at impact. The C723 Driver allows for added flight/spin rate manipulation with a 5-gram weight in the front. The Ridgeback Technology in both the E723 and C723 has evolved into 360-degree perimeter weighting and is 15% thinner. The... Read More

The new Mizuno ST230 Woods went through multiple iterative developments for stability, sound and spin. The result is adding exceptional ball speeds to an already great design. Mizuno’s new CORTECH Chamber encases a stainless steel weight with elastomeric TPU. The design takes stress from the clubface and turns it into an additional energy source. And, it contributes to a more solid, powerful sensation at impact. At the same time, locating weight closer to the clubface helps reduce spin rates. Read more about the new ST230 series. ST-Z 230 Driver and ST-X 230 Driver The ST-Z 230 Driver is a straight bias driver with great stability with off-center hits. Similar in look to the previous ST-Z, the 230 Series models feature the new CORTECH Chamber technology using TPU material. This creates faster ball speeds, less spin, better acoustics and a solid sensation at impact. Also balanced composite design provides for neutral weight distribution with deeper and shorter CG. The net result is workability in both directions with higher MOI and mid/low spins for more distance. The ST-X 230 Driver is a draw bias driver with weight closer to the hosel. This location of weight provides for the slightly higher spin rates... Read More